Meyra 1.610 MC1, Руководство по эксплуатации

Страница: 47 / 88

1
2
47
LIGHTING
For driving outdoors and on public roads
the electric wheelchair can be fit with
LED-lighting equipment.
The lighting is activated over the operating
module for the driver.
☞
Observe the operating manual < Oper-
ating module >!
☞
Always switch on the lighting system in
poor visibility conditions and especially
during darkness in order to see better
and be better seen by others.
☞
Ensure that headlights, turn signals and
taillights as well as reflectors are not
covered by clothes or other objects at-
tached to the electric wheelchair.
REAR-VIEW MIRROR
Removing the rear-view mirror
To remove the rear-view mirror loosen the
clamping screw (2) and pull the rear-view
mirror forward out of the arm support tube.
☞
Carefully place the rear-view mirror
down and protect the mirror glass from
strain or other objects.
☞
The rear-view mirror is to be kept clean
at all times.
Use common glass cleanser to clean the
mirror. In doing so the manufacturers in-
structions are to be observed.
Attaching the rear-view mirror
For drive mode insert the rear-view mirror
from the front into the arm support tube
and tighten the clamping screw (2).
Adjusting the rear-view mirror
1. Preadjust the rear-view mirror by turn-
ing the clasp.
2. Turn the rear-view mirror on the attach-
ment rod and ball joint until you reach
the desired angle.