7
8
20
Adjusting the back support angle
The angle of the back support to the
seat surface can be adjusted in fi ve
positions.
– Swivel the arm supports up.
– Loosen the screwed connection (7)
on each side.
– Remove the angled screwed con-
nection (8) on each side.
– Readjust the angle of the back sup-
port.
– Reassemble the angled screwed
connection (8) on each side.
– Retighten the screw (7) of each
side.
– Reinsert the arm supports.
☞
Note:
For this observe chapter <
Inserting
the arm support
>.
!
Attention:
We recommend to adjust the back
support vertically to the driving
surface. – Otherwise increased
danger of tilting!
