1
4
3
2
18
BACK SUPPORT
Folding over the back support
For storage or transport the back sup-
port (1) can be folded over and locked
into place (4).
– For this swivel the arm supports in
fi rst (2).
– Then unlock the back support by
pulling or pressing the rope (3) and
fold it onto the seat (4) until the
pressure bolt of the rope audibly
locks into place.
☞
Check the engagement of the back
support with a quick jerk.
Folding up the back support
– First pull or press the rope in the
middle in order to raise the back
support. Then pull the back sup-
port up as far as possible (1). – The
pressure bolt must audibly lock
into place.
☞
Check the engagement of the back
support with a quick jerk.
☞
Note:
The greasing of the thrust bolts is
recommended for an easier latch-
ing of the backrest.
– Swivel the arm supports outward
and insert them again (1).
☞
Note:
For this observe chapter < Inserting
the arm support >.
