1
2
3
16
SEAT
Seat belt
The seatbelt (1) is screwed onto the
seat tubes.
Adjusting the seat depth
!
Attention:
If an adjustment of the seat depth
is necessary contact your specialist
dealer.
Adjustment of seat inclination
The seat can be adjusted in angle.
– For this remove the clamping screw
that is to be repositioned (2) or (3)
on both sides and loosen the other
clamping screw on both sides.
– Position the axle tube parallel into
the free space of the tube clamp.
– Reassemble the clamping screws
(2) or (3) on each side.
– Retighten the other clamping
screws on both sides.
☞
Note:
It might be required to adjust the
angle of the back support after
such an adjustment, view chapter
<
Adjusting the angle of the back
support
>.
