2 |
P a g e
M o d e l V B 9 0 0
INTRODUCTION
Congratulations on the purchase of your new Meyer’s
Manure Spreader. With its optional equipment this is the
simplest, most flexible system on the market today. With
proper operation and preventative maintenance, it will
last for many years.
This
SAFETY
ALERT
SYMBOL
means
ATTENTION! BE CAREFUL
!
YOUR SAFETY IS
INVOLVED
! It stresses an attitude of
HEADS UP FOR
SAFETY
. When you see this symbol, be alert to the
possibility of
PERSONAL INJURY
and carefully read
the message that follows.
WARNING:
NEVER OPERATE WITHOUT ALL COVERS,
SHIELDS AND GUARDS IN PLACE. KEEP HANDS,
FEET AND CLOTHING AWAY FROM MOVING
PARTS. SOME COVERS AND GUARDS HAVE
BEEN REMOVED FOR ILLUSTRATIVE PURPOSES
ONLY IN THIS MANUAL. FAILURE TO HEED MAY
RESULT IN SERIOUS PERSONAL INJURY OR
DEATH.
At the front of this manual is a Product Registration
and Inspection Certificate. Be sure your dealer has
completed this certificate and forwarded a copy to the
manufacturer to validate the
manufacturer’s warranty.
The product model and serial number are recorded on
this certificate for your convenience and for proper
identification of your spreader by your dealer and the
manufacturer when ordering repair parts.
The serial number plate is found on the upper left front
corner of the spreader box or stamped in the left channel
at the front. For information on ordering repair parts, refer
to the repair parts section of this manual. Orders must list
the complete description, correct part number, and total
amount required.
All references to right hand and left hand apply to the
product as viewed from the rear of the machine and facing
the direction of forward travel.
You are urged to study this manual and follow the
instructions carefully. Your efforts will be repaid in better
operation and service as well as a savings in time and
repair expense. Failure to read this manual and
understand the machine could lead to serious injury. If you
do not understand instructions in this manual, contact
either your dealer or Meyer’s Equipment Manufacturing
Corp.
This supersedes all previous published instructions.
Contact Information
Meyer’s Equipment Mfg. Corp..
P.O. Box 406
Dorchester, WI 54425
Phone: (715)-654-5200
Fax: (715)-654-5558
Visit Us At: www.emcspreaders.com
Содержание VB900
