Meyer 8720 Operators Скачать руководство пользователя | Manualshive

Страница: 19 / 92

background image

Model 8720 / 8865

-19-

7. ADJUSTMENTS

WARNING

: SHUTOFF AND LOCKOUT POWER BEFORE CLEANING, ADJUSTING, LUBRICATING

OR SERVICING THIS SPREADER. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR
DEATH.

7.1. FRONT DRIVE ROLLER CHAINS

There are six roller chain drives located at the front of the spreader. Regularly check that all tensioning springs
are in serviceable condition for automatic roller chain tightening. Manually adjust spring tensioners (as needed)
by turning double locknuts on all tensioning bolt/idler assemblies. Proper roller chain tension is when 1/4" to 1/2"
deflection occurs on the slack side of the chain. Regularly re-check all roller chain tensions. Keep all roller
chains tight at all times! For clarity purposes, the following illustrations detail each roller chain reduction
separately.

NOTE:

The side bars of the roller chains will wear into the idler nylon rollers up to the rollers of the roller chain

forming grooves. These grooves will serve as a guide when the roller chain loosens due to normal use. From
this point on, after tightening, the idler nylon rollers should run for hundreds of hours without any noticeable
wear.

The  first  chain  drive  (PTO  input  shaft  to  the  large  RH
top sprocket, Figure 6) is automatically tensioned by a
spring  loaded  idler  nylon  roller.    The  extension  spring
should extend 2” from its neutral 5” total length.

Manual  adjustment  for  the  automatic  tensioning  idler,
nylon  roller  assembly  is  located  at  the  left  rear  of  the
spreader’s front bearing mounting plate.

FIGURE 6. FIRST CHAIN DRIVE

The  second  chain  drive  (large  RH  top  sprocket  to  the
large  LH  top  sprocket,  Figure  7)  is  automatically
tensioned  by  a  spring  loaded  idler  nylon  roller.  The
extension  spring  should  extend  2”  from  its  neutral  5"
total length.

Manual  adjustment  for  the  automatic  tensioning  idler,
nylon  roller  assembly  is  located  at  the  left  rear  of  the
spreader’s front bearing mounting plate.

FIGURE 7. SECOND CHAIN DRIVE

«
...
17
18
19
20
21
...
»

Содержание 8720 Operators





























































































Отзывы:

Нет отзывов

Похожие инструкции для 8720 Operators

Бренд: EarthWay Страницы: 2

APG8201 PINhandy 1

Бренд: ACS Страницы: 8

Бренд: ACT Страницы: 2

Бренд: HIKVISION Страницы: 14

FlashLink STI-UCF100

Бренд: SimpleTech Страницы: 5

Бренд: IDTECH Страницы: 45

CAMEDIA MAUSB-1

Бренд: Olympus Страницы: 29

Бренд: Harbor Freight Tools Страницы: 8

Бренд: Harbor Freight Tools Страницы: 11

Бренд: ironLogic Страницы: 3

Бренд: Cub Cadet Страницы: 20

Бренд: Meyer Страницы: 12

Бренд: xpr Страницы: 4

Бренд: Magstripe Страницы: 16

Бренд: ICT Страницы: 46

Бренд: Advanced Merchant Страницы: 11

Бренд: H&S Страницы: 46

Бренд: Unitech Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды