Meyer 8720 Operators Скачать руководство пользователя | Manualshive

Страница: 15 / 92

background image

Model 8720 / 8865

-15-

5.7.2.1. Truck Mounted Spreader Lights

Depending on the make and model of the truck it may be necessary to install a light converter (MEYER
PART #56-0028). Converter will allow signal lights and brake lights to operate according to DOT lighting
standard. Call factory for more information.

5.7.3. MINIMUM TRACTOR WEIGHT

Minimum  Tractor  Weight  is
calculated  as  2/3  of  the  towing
implement's gross weight (GW)

Spreader Loaded Weight X .667
=  Minimum  Tractor  Weight  Up
To 20 MPH

MODEL

MAXIMUM

SPREADER GROSS

WEIGHT (LBS)

MINIMUM TRACTOR

WEIGHT UP TO

20 MPH (LBS)

SI8720T

46,645

31,000

SI8865T

56,140

37,500

Tractor PTO Horsepower Requirements:

The PTO horsepower requirements may not reflect adequate

tractor size for towing the machine. Refer to tractor weight requirements for these recommendations and
safety section for additional tractor and towing requirements.

5.7.4. SAFETY CHAIN

CAUTION:

A SAFETY CHAIN MUST BE INSTALLED TO RETAIN THE CONNECTION BETWEEN

TRACTOR (OR OTHER TOWING VEHICLE) AND SPREADER WHENEVER TRAVELING ON PUBLIC
ROADS IN CASE THE HITCH CONNECTION WOULD SEPARATE. A SUGGESTED ATTACHMENT IS
ILLUSTRATED ON FIGURE 4.

The  chain  must  be  of  adequate
size  to  hold  the  weight  of  the
loaded  spreader  (See  table  on
page  17).    See  your  ag  cart  or
wagon owner / operator’s and parts
book,  which  is  also  available  at
www.meyermfg.com.  If  using  a
grab  hook  at  the  end(s)  of  the
chain to secure the chain to itself, a
hook latch must be installed.

The  length  of  the  safety  chain  is
not  to  be  any  longer  than
necessary

to

turn

without

interference.  If  any  chain  links  or
attachment hardware are broken or
stretched,  repair  before  using.
Store  chain  so  it  does  not  corrode
or  become  damaged.  Do  not  use  this  chain  for  other  implements  because  the  strength  and  length  of  the
chain  may  not  be  adequate.  Identify  this  chain  for  use  on  this  particular  spreader.  Do  not  use  the
intermediate support as the attaching point.

If you do not have a safety chain, or need a replacement safety chain, see your local Meyer dealer and do
not operate on public roads until you are able to travel with the safety chain properly installed.

5.7.5. OPTIONAL BRAKE PACKAGE

See INST-BRAKE-IMT for maintenance and adjustment information on this optional brake equipment. Call
Meyer Manufacturing Corporation at 1-800-325-9103 for a replacement manual.

FIGURE 4. SAFETY CHAIN INSTALLATION

«
...
13
14
15
16
17
...
»

Содержание 8720 Operators





























































































Отзывы:

Нет отзывов

Похожие инструкции для 8720 Operators

Бренд: ID Tech Страницы: 5

Бренд: ICT Страницы: 38

Бренд: SAMSys Страницы: 60

Бренд: CEMO Страницы: 28

Бренд: Stanley Страницы: 48

Бренд: Viking Страницы: 4

Бренд: Sonnet Страницы: 2

Бренд: Kanguru Страницы: 29

Бренд: FAMOCO Страницы: 16

Бренд: EarthWay Страницы: 8

Бренд: Nedap Страницы: 23

Бренд: Gardol Страницы: 56

Бренд: H&S Страницы: 46

Бренд: Zonet Страницы: 2

Бренд: Duali Страницы: 5

Network Adapter 42982V0

Бренд: Lindy Страницы: 6

Ev-N-SprEd 2030 Series

Бренд: EarthWay Страницы: 2

Бренд: Ingenico Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды