1
.
Remove components from carton and
place spreader upside down on a padded
surface. Install LH. & RH. handle braces
to frame as shown using four (4) 1/4-20 x
2 1/4” hex bolts and nuts but do not
tighten.
ASSEMBLY
3
.
Turn spreader upright and install end of
handle tube with DOT between handle
braces as shown. Secure with (2) 1/4-20 x 1
1/2” hex bolts and nuts.
1
/4-20 x 1 1/2”
Hex Bolt
1/4-20 Hex
Nut
Handle
Tube
2
.
Install drive wheel onto right-hand end
of axle (you can identify the drive wheel
by the cotter pin hole drilled in the hub).
Hub must face toward frame. Align the
hole in the drive wheel hub and the hole
in the axle. Secure drive wheel to axle
with 5/32 dia x 2” cotter pin. Install the
free wheel on the opposite end of axle.
Insert 5/32 dia x 1” cotter pin in the hole
near the end of axle to retain free wheel.
DOT
RH. Handle
Brace
LH. Handle
Brace
1/4-20 x 2 1/4”
Hex Bolt
1/4-20 Hex
Nut
Drive Wheel
Free Wheel
5/32 Dia x 2”
Cotter Pin
1/8 Dia x 1”
Cotter Pin
