Meusburger H 4062 Скачать руководство пользователя страница 9

6.2.3. Switching the machine off 

 

In order to switch off the machine, both manual slide valves must be closed and 
then the main switch turned off. This avoids any unwanted untimely movement of 
the pallets caused by turning the shut-off valve.  

6.2.4. Emergency shut-down

In an emergency, the shut-off valve must be turned off immediately, so as to cut off 
the compressed air supply to the entire system.

7. Maintenance, cleaning, servicing

The correct condition and functioning of all mechanical operating parts must be checked prior to 
each use. The schedule for these checks must be set in such a way that any faults that arise can be 
detected in good time or any damage immediately rectified. The air hoses must be checked daily 
for possible damage. In addition, the table‘s surface and shoulders and the moveable plates must 
be oiled regularly, otherwise they will be subject to severe corrosion. The shoulders must be che-
cked regularly to make sure that they are firmly attached.

7.1. Auxiliaries and consumables

Meusburger Multi oil VMM 4/1/400 for the regular oiling of corroding parts.

7.2. Replacement parts and parts subject to wear

Replacement parts may simply be ordered from our sales department. Compressed air hoses 
should be renewed after no more than 6 years.

8. Troubleshooting and fault correction

8.1. Fault / malfunction – Cause – Correction

In the event of damage to the compressed air circuit, the circuit must be systematically che-
cked from the pneumatic source right through to the moveable plates.

9. Decommissioning

9.1. Temporary shut-down

In the event of temporary shutdown or storage, the entire assembly table must be oiled, 
otherwise it will be subject to severe corrosion. It should be stored in a dry place.

10. Disassembly, removal and disposal

10.1. Recycling

As the assembly table is made of iron and plastics only, it may be disposed of via the conven-
tional system of separated rubbish disposal. Assembly tables that have reached the end of 
their service life may be returned to Meusburger Georg GmbH for disposal, free of charge.

9

Содержание H 4062













Отзывы: