Meusburger H 4062, Руководство пользователя

Страница: 3 / 12

1. User instructions
1.1. Purpose and validity of document
This description contains the information that is necessary for the proper use of the products
described therein. It is intended for use by technically qualified personnel. Qualified personnel are
persons who, by virtue of their training, experience and instruction, in conjunction with their know-
ledge regarding the relevant standards, regulations, accident prevention regulations and opera-
ting conditions, have been authorised by the Plant Safety Officer to carry out the required activities
in order to ensure that potential hazards are recognized and avoided..
1.2. Visual representation of safety instructions
1.2.1. Wear safety footwear:
1.2.2. Crushing hazard:
1.2.3. Trip hazard:
2. General safety instructions
2.1. Intended use
The assembly table is used in order to facilitate the installation and maintenance work on
injection moulds, die casting moulds and punching tools. It is only intended for moulds and
tools that possess sufficient stability by virtue of the ratio of their footprint-to-height ratio.
Proper use of the assembly table also includes compliance with the instructions regarding
safety, operation, maintenance and servicing which form part of this user manual.
2.1.1. Technical specifications
Description of Unit H 4062/496/1156 H 4062/796/1496 H 4062/996/1846
Dimensions WxLxH [mm] 526x1186x860 826x1526x880 1026x1876x700
Unladen weight [kg] 320 700 1.200
Maximum connection pressure [bar] 6 6 8
Maximum load on the table [kg] 3.000 3.000 5.000
Maximum load on the moving plates
(per plate)
[kg] 2.000 2.000 2.500
Maximum tool size [mm]
Width 500
Height 1000 Width 800
Height 1000 Width 900
Height 1300
Maximum tool overhang over
moving plates
[mm] 80 on all sides 100 on all sides 50 on all sides
Attention
3