Meusburger H 4062, Руководство пользователя

Страница: 8 / 12

ON OFF
moveable
fixed
6. Operation (normal operation)
6.1. Operating and display elements
6.1.1. Machine control
Both halves of the mould can be switched on and off separately using the manu-
al slide valves. In order to avoid any undesirable movements, always activate only
one half of the mould and once the movement has been completed, immediately
switch it off again.
A mould-half can be additionally secured by means of two pins incorporated into
the table‘s surface. Any mould halves that are not in use must always be secured.
6.2. Control and operation
6.2.1. Placing the tool
The tool halves are to be positioned as centrally as possible on the support plates.
Only then is there an optimal air flow and thus the movement of the plates is gua-
ranteed.
6.2.2. Switching the machine on
In order to switch on the machine, first of all, the shut-off valve must be opened. The
manual slide valves can then be used to control each plate individually.
E 1300 Dowel pin
8