Metz Megablitz 28 AF-4 M, Руководство по эксплуатации

Страница: 36 / 76

11. Care and maintenance- Troubleshooting
36
Remove grime and dust with a soft, dry cloth. Do not
use cleaning agents as these could damage the
plastic parts.
Forming the flash capacitor
The flash capacitor incorporated in the flashgun
undergoes a physical change when the flashgun is
not switched on for prolonged periods. For this
reason it is necessary to switch on the flashgun for
approx. 10 minutes every 3 months and to fire a few
flashes The batteries must supply sufficient power to
light up the flash-ready light within one minute after
the flashgun was switched on.
Troubleshooting:
If the flashgun does not work as it should in the
individual modes, then proceed as follows:
•Switch off the flashgun with the main switch.
•Remove the rechargeable or dry-cell batteries for a
brief period, and then load them again.
Malfunctions and damage caused to the
mecablitz due to the use of accessories
from other manufacturers are not covered
by our guarantee!
•Mecalux 11 (Order No: 000000112)
Sensitive slave triggering unit for cordless delay-free
firing of auxiliary flashguns by a camera-linked
flash. Responds to infrared light. No batteries
required.
•Bounce diffuser 28-23 (Order No: 000028237)
•Bag T 33 (Order No: 000006331)
k
12. Optional extras