metrotek Bercut-ETL, Руководство по эксплуатации

Страница: 24 / 25

24 Remote management
tftp.exe -i IP-address_of_device put C:\work\etl_X.X.X.bin
Note: instead of etl X.X.X.bin inscription it is necessary to enter
corresponding file name.
Figure 5.4. Upgrading software versions (Windows)
After a short while a message about command performance will appear in
console terminal.
When the software package file is uploaded Bercut-ETL will automatically
reboot.
Notes
•
If current and new versions of the software are very much dif-
ferent, settings are restored to default.
•
In case of unsuccessful upgrade device work still may be restored.
Just hold the button of a loop’s level choice for 5 seconds while
turning on power supply.
Device will restore normal operation within 1 minute.
Bercut-ETL. Operating manual