metrotek Bercut-ETL, Руководство по эксплуатации

Страница: 23 / 25

5.4 Upgrading software versions 23
5.4.2 PC setup for device software upgrading
If you use
Unix operating system
:
1. To set TFTP client to work in binary mode on PC, that is connected to
the same network as device, enter in console terminal:
mode binary
2. To connect to the device by means of TFTP client, enter in console terminal:
connect IP-address_of_device
3. To upload software package file with the new version of software, enter in
console terminal:
put path-to-file/etl_X.X.X.bin
Note:
instead of
etl X.X.X.bin
inscription it is necessary to enter
corresponding file name.
Figure 5.3. Upgrading software versions (Unix)
When you perform device software upgrading in
Windows operating sys-
tem
enter in console terminal:
Bercut-ETL. Operating manual