Metrotech 480B Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 28

Metrotech 480B Скачать руководство пользователя страница 28

29

WARRANTY

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY, BEYOND THOSE STATED HEREIN.

Metrotech warrants its equipment to be free from defects in workmanship and material under normal and
proper use and service for one year from date of purchase by original user. Metrotech assumes no
obligation to repair or replace equipment which has been altered or repaired by other than a Metrotech-
approved procedure, been subject to misuse, misapplication, improper maintenance, negligence, or
accident; has had its serial number or any part thereof altered, defaced or removed; or been used with parts
other than those approved by Metrotech. Warranty does not include batteries. Expendable items such as
fuses and lamps are excluded.

Any detection product proved defective under this warranty will be repaired or replaced free of charge at
the Metrotech Corporation factory or approved Metrotech repair station. The equipment should be returned
to our factory by prepaid transportation after requesting and receiving return authorization from our
Customer Service Department. Metrotech’s obligations are limited to repair or replacement of broken or
defective parts which have not been abused, misused, altered, or accidentally damaged, or at the option of
Metrotech, to refund of the purchase price. Metrotech assumes no liability for removal or installation costs,
consequential damages, or contingent expenses of any other nature.

Part#: 600A080B
Price $10.00

«
...
26
27
28

Содержание 480B





























Отзывы:

Нет отзывов