13
A - Foreword
This user manual shows you how to install a motorized unit
with the motor, ref: 450907-8. Such installation requires some
operations, on the motor and on the satellite receiver with which
it is supposed to work. To ease the read of this procedure, we
have written it in two parts. The first describe the repetitive ope-
rations that you have to do with the receiver. In the second part
(installation as such), these operations will simply be quoted and
pinpointed by a figure.
4 - Continuous rotation
In the DiSEqC 1.2 menu, highlight the
Move
field
Press and hold the
4
key to turn West. Press OK to stop the motion. Use
4
key to turn East.
5 - Step by step rotation
In the DiSEqC 1.2 menu, highlight the
Move
field
Press quickly the
4
key to turn one step West. Use
3
key to turn East.
1 - Put the receiver on the satellite reference channel
Put the receiver on the satellite reference channel. Go into the paragraph 1E (page 9) and then locate
the satellite reference channel. In case this channel is not valid anymore, choose, when it is possible, any
channel with a debit (SR) above 20000.
2 - Go into the menu DiSEqC 1.2
Before accessing the DiSEqC 1.2 menu, you must first enable the motor :
• Go to MENU /
Installation / Antenna Setup
Go to MENU /
Go to MENU /
• On the
DiSEqC Mode
fi eld, select
DiSEqC 1.2
with
34
arrow keys
• Press the the black key to save and exit.
When the DiSEqC 1.2 is enabled, simply press the black key, while viewing channels, to access the
DiSEqC 1.2 menu.
3 - Reset the motor
In the DiSEqC 1.2 menu, press the red key. If you can’t see your dish, wait until the progression bar is
complete. If you can see the dish, you can save time by pressing EXIT as soon as the motor has reached
its reference position.
4 - Installation of a motorised unit
6 - Gives a number to a satellite
• In the DiSEqC 1.2 menu, highlight the
Position
fi eld.
• With
34
arrow keys, select the number of the satellite that you want to allocate to the
current satellite.
Note : In case of hesitation, keep the default number. If you change to an number that is already used
by another satellite, a warning window will be displayed. Ignore it if you’re sure about the number you
want to use.
• Press OK to confi rm, the motor will move to the position #1 stored in its memory.
7 - Memorised the satellite position
In the DiSEqC 1.2 menu, highlight the
Move
field
Press OK to store current position as the position of current satellite.
8 - Display the level indicator
Press the INFO key to display Quality and Level of reception of the current channel.
Содержание TouchBOX 3
Страница 2: ......
Страница 46: ...46 ...
Страница 47: ......
Страница 48: ...Node Park Touraine BP 1 TAUXIGNY 37310 REIGNAC SUR INDRE CEDEX FRANCE www metronic com Product made in Asia ...