Metronic 450908, Руководство по установке, Страница: 16 / 28

H
Assemble the satellite dish on the motor
• Assemble the satellite dish and fix it on the motor’s
mast. The satellite dish U-Bolt must be the highest as
possible on the angled arm to avoid the bottom of the
dish to touch the motor. As the motor is at 0°, make sure
you perfectly align the dish offset arm with the motor
(diagram H1).
• Direct approximately the whole (satellite dish + rotor)
towards the south. Adjust the angle on the back support
of the dish, so as to do the dish will be vertical.
• Switch on the receiver.
• Do a continuing rotation
(4)
until the stop 45° East and
45° West to check if there is no obstacle. If you get close
from an obstacle during the spin, go to paragraph N
page 21 to adjust your mechanical stop.
• Put the receiver on the Hotbird reference channel.
G
Satellite dish assembling
Assemble the different elements from the satellite dish in
checking the user manual included with it.
14
0 208 994 11 81
(4)
Go to corresponding
paragraph page 2 and 3