Metronic 450908, Руководство по установке, Страница: 10 / 28

Angle adjustment
Look at the European map (look opposite) and find your
angle in relation to the horizontal line. For example, about
31,5° for Glasgow, 38° for Bordeaux and 39,5° for Napoli.
Cut out at the last page of this user manual the angle
system that will allow you to read precisely the motor
angle. Cut the map with a cutter. He might be useful to
make a copy on a heavy duty paper. In case you damage
it, you could do it all over again after downloading the user
manual on the Metronic website, www.metronic.com.
Position the angle system on the west side of the motor like
on the picture C2, the angle is 31,5°.
Adjust the nut from the 2c screw to display the incline of
your location.
When the right angle as been adjusted, tighten the screw,
and the nut 2d as well.
OK
• Tighten the screw 2d with moderation to be able to adjust
the angle of the motor. Make sure you put the nut head
correctly so the upper side will be horizontal (see diagram
below).
8
0 208 994 11 81