Metrologic Optimus R, Руководство по программированию

Страница: 127 / 241

Chapter 3 Terminal Specific Function Library 121
SetNetConfig
Purpose To write the whole networking configurations to the system.
Syntax void SetNetConfig (struct NETCONFIG *config);
Example struct NETCONFIG nc;
struct NETSTATUS ns;
..............................
GetNetConfig (&nc);
nc.DhcpEnable = 1;
SetNetConfig (&nc);
if (NetInit() < 0) {
printf ("Initialization Fail");
..................................
}
do {
OSTimeDly (10);
GetNetStatus (&ns);
} while (!ns.IPReady);
Description This routine writes the whole network configurations to the system. Before
writing, the application should make sure that every setting is significant. The
best way is calling GetNetConfig first to get the original settings and change
them one by one.
The application should reserve enough stack or define a static variable to store
the structure of NETCONFIG.
It is recommended to use SetNetParameter() to set the parameters for the
stability and compatibility in the future. NetInit() will initialize the networking
according to the configurations written.
Return None
See Also GetNetConfig, SetNetParameter