4
Figure 1
Parts of the ScanGlove Scanner
Becoming familiar with the features of the scanner will help when operating
the scanner. The following illustration and list explain the pertinent parts.
Green and Red LED
When the red LED is on, this shows that the
laser is on. Depending upon your decoder,
when the green LED flashes on, this shows
that the scanner has read a bar code
successfully. When the green light turns off,
communication to the host is complete.
Output Window
Sends and receives the IR signal and Laser
beam.
Infrared
If a specified time has elapsed without any
Object Sensor
scanning, the unit will enter a “standby”
mode. To reactivate the unit, point the
output window downwards or wave an
object in front of the IR (infrared) sensor.
When the red LED comes on, the scanner is
ready to scan.
Head Cable
This cable terminates to the specifications of
each order.
