Mira Cal Software
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2
￭￭￭￭￭￭￭￭
1.3
Mira Cal Software
In order to configure a
Mira M-3
instrument, the following software is
needed:
Table 2
Model versions
606071010
Mira Cal Software 3.0
1.4
About the documentation
NOTE
Please read through this documentation carefully before putting the
product into operation.
The document contains important safety information and warnings
which you must follow in order to ensure safe operation of the instru-
ment. Metrohm is not responsible for damages and safety hazards
that occur from using the instrument in a manner that is not specified
in the user manual.
Symbols and conventions
The following icons and formatting may appear in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the sec-
ond to the product part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Method
Designations for names of parameters, menu items,
tabs and dialog windows in the software.
File
▶
New
Menu or menu item
Work area /
Properties
Menu paths in order to arrive at a particular position
in the software.
[Next]
Button
or
key
Proprietary Information Statement
This manual contains the valuable proprietary information of Metrohm
Raman, Inc. and its affiliates, including all designs and related material,
and such information is disclosed in confidence. It is intended solely for