Metrohm Mira M-3 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 41

Metrohm Mira M-3 Скачать руководство пользователя страница 36

Maintenance agreement

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

30

￭￭￭￭￭￭￭￭

8 Maintenance

8.1

Maintenance agreement

Maintenance of the product is best carried out as part of an annual service
performed by specialist personnel from Metrohm. Shorter maintenance
intervals may be necessary if you frequently work with caustic and corro-
sive chemicals. Metrohm Service personnel are properly trained in proce-
dures for safely repairing the instrument.

Routine cleaning of the instrument can be done using non-corrosive
cleansers such as water, ethanol, or acetone.

Metrohm Service offers every form of technical advice for maintenance
and service of all Metrohm products.

8.2

Cleaning the product

WARNING

Danger of poisoning and chemical burns from chemical hazard-
ous substances

Poisoning and/or chemical burns by contact with aggressive chemical
substances.

￭

Use only detergents that do not cause any unwanted side reac-
tions with the materials to be cleaned.

￭

Clean contaminated surfaces.

￭

Wear protective equipment.

￭

Use exhaust equipment when working with vaporizing hazardous
substances.

￭

Dispose of chemically contaminated materials (e.g. cleaning mate-
rial) properly.

«
...
34
35
36
37
38
...
»

Содержание Mira M-3










































Отзывы:

Нет отзывов