Metrohm 915 KF Ti-Touch, Руководство - Краткие инструкции

Страница: 33 / 39

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Operation
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
27
Switching off the instrument
CAUTION
The 915 KF Ti-Touch must be switched off by pressing the power
switch on the rear of the instrument before the electricity supply is
interrupted. If this is not done, then there is a danger of data loss.
Proceed as follows:
1 Press the power switch on the left-hand side of the back panel of the
915 KF Ti-Touch.
The current data is saved and the system is shut down. This process
takes just a short time. At the same time, all other instruments con-
nected to the 915 KF Ti-Touch via a USB cable are also being
switched off.
6.2 Fundamentals of operation
6.2.1 Touch-sensitive screen
The entire 915 KF Ti-Touch user interface is touch-sensitive. Simply touch
a few of the buttons on the interface to learn how a touch-sensitive
screen reacts. You can always return to the main dialog by touching
[ ] .
In order to activate an element on the 915 KF Ti-Touch user interface, just
touch the screen with your fingertip, finger nail, the eraser of a pencil or a
stylus (special tool for operating instruments with touch-sensitive screens).
CAUTION
Never touch the touch screen with a pointed or sharp object such as a
ballpoint pen.
In the default setting, the software is configured in such a way that an
acoustic signal will be generated every time an active control is touched.
This setting can be deactivated in the system settings.