Metrohm 915 KF Ti-Touch, Руководство - Краткие инструкции

Страница: 23 / 39

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Installation
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
17
3 Switch on the Ti-Touch.
You can connect an 885 Compact Oven SC. The Remote Box also has an
MSB socket at which a further MSB device, e.g. a dosing device, can be
connected.
You will find precise information concerning the pin assignment of the
interface on the Remote Box in the Appendix of the more detailed man-
ual.
5.5 Connecting USB devices
5.5.1 General
The 915 KF Ti-Touch has a USB connector (Type A socket) for peripheral
devices with USB interface and for Sample Processors. If you wish to con-
nect more than one device to the USB, you can use a commercially avail-
able USB hub.
NOTE
We recommend that the Ti-Touch be switched off while you set up or
disconnect connections between the devices.
5.5.2 Connecting a USB hub
Use a USB hub with its own power supply.
Connect the USB hub as follows:
1 With the help of the 6.2151.030 cable (length 0.6 m) or the
6.2151.020 cable (length 1.8 m), connect the USB connector of the
Ti-Touch (Type A) with the USB connector of the hub (Type B, see
manual for the USB hub).
The USB hub is recognized automatically.
5.5.3 Connecting a printer
Printers that are connected to the 915 KF Ti-Touch must meet the follow-
ing requirements:
￭
Printer languages: HP-PCL, HP-PCL-GUI, Canon BJL Commands or
Epson ESC P/2
￭
Paper size: A4 or Letter.
Connect the printer as follows: