Metrohm 867 pH Module, Руководство пользователя

Страница: 20 / 49

3.2 Connecting a controller
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
12
￭￭￭￭￭￭￭￭
867 pH Module
NOTICE
Do not use a not permitted power cord!
1 Plugging in the power cord
￭
Plug the power cord into the instrument's power socket.
￭
Connect the power cord to the power grid.
3.2.1.3 Connecting a computer
The 867 pH Module requires a USB connection to a computer in order to
be able to be controlled by a computer software. Using a 6.2151.000
controller cable, the instrument can be connected directly, either to a USB
socket on a computer, to a connected USB hub or to a different Metrohm
control instrument.
You need administrator rights for the installation of driver software and
control software on your computer.
Cable connection and driver installation
A driver installation is required in order to ensure that the 867 pH Module
is recognized by the computer software. To accomplish this, you must
comply with the procedures specified. The following steps are necessary:
1 Install the software
￭
Insert the computer software installation CD and carry out the
installation program directions.
￭
Exit the program if you have started it after the installation.
2 Establishing the cable connections
￭
Connect all peripheral devices to the instrument, see chapter 3.3,
page 14 .
￭
Connect the instrument to the power grid if you have not already
done this
(see chapter 3.2.1.2, page 11) .
The "On" LED on the 867 pH Module is not yet illuminated!
￭
Connect the instrument to a USB connector (type A) of your com-
puter (see manual of your computer). The 6.2151.000 cable is
used for this purpose.