Metrix ASYC-IV MTX 3290, Руководство по эксплуатации

Страница: 45 / 62

Technical characteristics of the MTX 3290
6,000- and 60,000-count digital multimeters 45
Technical characteristics of the MTX 3290 (continued)
Resistance
Ohmmeter In this setting, the user can measure a resistance.
Particular reference conditions:
The (+COM) input must not have been overloaded following the accidental
application of a voltage to the input terminals with the switch set to
Ω or T°.
If this happens, the return to normal may take about ten minutes.
Protection: 850Vpk
Range
Specified
measurement
range
Resolution Uncertainty
Measurement
current
Open-circuit
voltage
600 Ω
0 to 600.0 Ω
∗ 0.1 Ω 0.5% L ±2D ≈ 850µA
<5V
6k Ω 0 to 6.000k Ω 0.001k Ω
0.5% L ±2D
≈ 126.6 μ A
60k Ω 0 to 60.00k Ω 0.01k Ω ≈ 12.6 μ A
600k Ω 0 to 600.0k Ω 0.1k Ω ≈ 1.26 μ A
6M Ω 0 to 6.000M Ω 0.001M Ω 1.5% L ±3D ≈ 240nA
60M
Ω
0 to 60.00M Ω 0.01M Ω 3% L ±3D ≈ 29nA
(
∗
) REL measurements
Capacitance
Capacitance
meter
In this setting, the user can measure the capacitance of a capacitor.
Range
Operating
range
Specified
measurement
range
Resolution
Intrinsic
error
Measurement
current
Measurement
time
6nF
0.100 to
6.000nF 0.100 to
6.000nF
0.001nF 2.5% L ±30D ≈ 1.26µA ≈ 400ms
60nF 0 to 60.00nF 0 to 60.00nF 0.01nF 1.5% L ±8D ≈ 1.26µA ≈ 400ms
600nF 0 to 600.0nF 0 to 600.0nF 0.1nF 1.5% L ±5D ≈ 1.26µA ≈ 400ms
6µF 0 to 6.000µF 0 to 6.000µF 0.001µF 1.5% L ±5D ≈ 12.6µA ≈ 0.125 s/µF
60µF 0 to 60.00µF 0 to 60.00µF 0.01µF 1.5% L ±5D ≈ 126.6µA ≈ 0.125 s/µF
600µF 0 to 600.0µF 0 to 600.0µF 0.1µF 3.5% L ±5D ≈ 850µa ≈ 0.125 s/µF
6mF 0 to 6.000mF 0 to 6.000mF 1µF 4.5% L ±5D ≈ 850µa ≈ 17 s/mF
60mF 0 to 60.00mF 0 to 60.00mF 10µF 6.5% L ±5D ≈ 850µa ≈ 17 s/mF
The use of wires that are very short and shielded is strongly recommended.
Protection: 850Vpk