MI 3295 Step Contact Voltage Measuring System
Data handling
42
8.3
Communication
Metrel ES Manager PC SW is used for communication with the instrument. Following
functionalities are supported:
- uploading customized structure data to the Meter
- downloading stored results from Meter to PC
There are two communication interfaces available on the Meter: USB and RS232.
The instrument automatically selects the communication mode according to detected
interface. USB interface has priority.
How to transfer stored data:
RS232 communication: connect a PC COM port to the instrument PS/2 connector
using the PS/2 - RS232 serial communication cable.
USB communication: connect a PC USB port to the instrument USB connector
using the USB interface cable.
Switch on the PC and the instrument.
Run the
Metrel ES Manager
software
.
Select communication port.
The PC and the instrument will automatically recognize each other.
The instrument is prepared to communicate with the PC.
Metrel ES Manager is a PC software running on Windows 7, Windows 8, Windows 8.1 and
Windows 10.
