3 Power Supply and Electrical Specification
The QuasarLR is powered using 24 V DC which are connected at the front of the device. If
you do not use a power supply supplied by metraTec, please make sure that your own PSU
provides a supply voltage of high quality. If possible, use a PSU with high precision/high
speed linear regulator. If you use a switching PSU, please make sure that the switching
frequency is > 500 kHz.
Connector
Description
X3.1
GND
X3.2
24 V DC
Tab. 1: Description of Power Connector
Operating Voltage
24 V DC
Power Consumption, RF on
500 mA
Power Consumption, RF off
150 mA
Power Consumption, Sleep
110 mA
Voltage Inputs/Outputs
24 V
Tab. 2: Maximum Rating and Electrical Limits
Technical Documentation metraTec QuasarLR
Page 7 of 19
Fig. 2: Power Connector Description (ref. Tab. 1)
