Metra Electronics Metra Electronic Lock, Руководство по установке

Страница: 11 / 23

9
Mounting the Electronic Lock Body. – Continued.
•
The electronic Lock body should be mounted first and then the Door strike.
•
Make sure the crimped flat ribbon cable is connected properly to the Electronic Lock.
•
Push the Electronic Lock against the inner locker wall and push/fold the excess flat ribbon cable into the cable
entry hole, being careful not to damage the cable.
•
Using the appropriate screws, firmly screw the Electronic Lock body to the locker carcass wall.
Being careful to not to overtighten the screws, as this can damage the Electronic Lock, by deforming it.
Damage to the Electronic Lock by overtightening the screws is not covered under warranty.
OK –
Electronic Lock body is slightly proud of
the front face of the Locker carcass.
Locking is possible
WRONG!!
– Electronic Lock body is behind
the front face of the Locker carcass.
The Locker door strike cannot fully engage
into the Electronic Lock body.
Locking is NOT possible!