99-9613
®
Handlebar Control Settings
(Cont)
9
Radio Type
If the L.E.D. flashes do not match the radio that is connected, change the radio type.
1.
After (3) seconds of turning the key on, press and hold the Volume-Down button
on the handlebar until the L.E.D. in the ASWC-1 goes solid.
2.
Release the Volume-Down button; the L.E.D. will go out indicating we are now
in Changing Radio Type mode.
3.
Refer to the Radio Legend to know which radio number you would like to have
programmed.
4.
Press and hold the Volume-Up button until the L.E.D. goes solid, and then
release. Repeat this step for the desired radio number.
5.
Once the desired radio number has been selected, press and hold the Volume-
Down button on the handlebar until the L.E.D. goes solid. The L.E.D. will remain
on for about (3) seconds while it stores the new radio information.
6.
Once the L.E.D. goes off, the Radio Type mode will then end. You can now test
the handlebar controls.
Note:
If at any time the user fails to press any button for a period longer than
ten seconds, this process will abort
.
Continued on the next page
Attention:
Axxess Updater App can also be used to program the following (3) sub-
sections as well, pending that the interface has been initialized and programmed.
Radio Legend
1
- Eclipse (Type 1)
2
- Kenwood
3
- Clarion (Type 1)
4
- Sony / Dual
5
- JVC
6
- Pioneer/Jensen
7
- Alpine
8
- Visteon
9
- Valor
10
- Clarion
(Type 2)
11
- Metra OE
12
- Eclipse
(Type 2)
13
- LG
14
- Parrot
15
- XITE
16
- Philips
17
- JBL
