99-9613
®
10
1
- Not allowed
2
- Not allowed
3
- Seek-Up/Next
4
- Seek-Down/Prev
5 -
Mode
6
- Mute
7
- Preset-Up
8
- Preset-Down
9
- Power
10
- Band
11
- Play/Enter
12
- PTT (push to talk)
13
- On-Hook
14
- Off-Hook
15
- Fan-Up *
16
- Fan-Down *
17
- Temp-Up *
18
- Temp-Down *
Button Assignment Legend
Note:
The aftermarket radio may not have all of these commands. Please refer to
the manual provided with the radio, or contact the radio manufacturer, for specific
commands recognized by that particular radio.
* Not applicable in this application
Handlebar Control Settings
(Cont)
Remap Buttons
The interface has the ability to change the button assignment for the handlebar
control buttons, except Volume-Up and Volume-Down. Follow the steps below to
remap the handlebar control buttons.
1.
Within the first twenty seconds of turning the ignition on, press and hold the
Volume-Up button on the handlebar until the L.E.D. goes solid.
2.
Release the Volume-Up button, the L.E.D. will then go out; The Volume-Up
button has now been programmed.
3.
Follow the list in the Button Assignment Legend to reference the order in which
the handlebar control buttons need to be programmed.
Note:
If the next function on the list is not present on the handlebar, press the
Volume-Up button for (1) second until the L.E.D. comes on, and then release the
Volume-Up button. This will tell the ASWC-1 that this function is not available,
and it will move on to the next function
.
4.
To complete the remapping process, press and hold the Volume-Up button on
the handlebar until the L.E.D. in the ASWC-1 goes out.
