99-7617HG
®
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
ISO DIN radio provision with pocket
1.
Attach the
to the
radio
brackets
using the (4) #8 x 3/8”
Phillips screws provided. (Figure A)
2.
If equipped with automatic climate
controls, secure the climate module
removed in Dash Disassembly,
to the radio brackets, using the
factory hardware. (Figure B)
3.
Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
4.
Slide the radio into the bracket/
pocket assembly, and then secure
it using the screws supplied with
the radio. (Figure C)
5.
Locate the factory wiring harness
and antenna connector in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
6.
Reassemble the dash in reverse
order of disassembly.
3
