1.800.221.0932
|
MetraOnline.com
2
1.
Open the passenger door then unclip
and remove the panel on the side of the
dashboard. Remove (1) Phillips screw
exposed. (Figure A)
2.
Unclip and remove the entire panel
surrounding the climate control.
(Figure B)
3.
Carefully unclip and remove the panel
surrounding the radio. (Figure C)
Note:
This panel is held on by (18) clips.
Extreme care and patience must be
taken not to break the panel.
4.
Remove (6) Phillips screws securing
the radio, then unplug and remove
the radio.
Note:
The lower harness will reconnect
into the kit during kit assembly.
Continue to Kit Assembly
DASH DISASSEMBLY
(Figure B)
(Figure A)
(Figure C)