background image

Table of Contents

Applications

K

NOWLEDGE IS 

P

OWER

E

nhance your installation and fabrication skills by 

enrolling in the most recognized and respected 
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call 
800-354-6782 for more information and take steps 
toward a better tomorrow.

Metra recommends MECP 
certified technicians

Caution

Metra recommends disconnecting the negative battery terminal before beginning any  

installation.  All accessories, switches, and especially air bag indicator lights must be  

plugged in before reconnecting the battery or cycling the ignition.  

*NOTE: There are (2) extra radio housing panel clips included with the kit in case 

removal of the kit is necessary at any time. 

*NOTE: Refer also to the instructions included with the aftermarket radio.

Ford

Escape 2008-Up

Mazda

Tribute 2008-Up

Mercury

Mariner 2008-Up

Dash Disassembly

 

- All Vehicles.....................................................................................................................1,2

Kit Assembly

- Kit Preparation..................................................................................................................2
- DIN Radio with Pocket Provison........................................................................................2
- ISO Mount Radio with Pocket Provison..............................................................................2
- Double DIN Radio Provison................................................................................................2
- Stacked ISO Mount Units Provison.....................................................................................2

99-5814

Содержание 99-5814











Отзывы: