Metos RN 20, Руководство по обслуживанию

Страница: 15 / 59

5.10.2004 Rev. 1.0
Installation
9
5. Installation
5.1 Installation
The mixer can be placed direct on the floor. Foundation bolts in the floor are only neces-
sary under special conditions, e.g. in ships. If the 20 L mixer is placed on a bench stand,
it must be fastened with the enclosed bolts.
If the floor is not level, the position of the mixer can be corrected by loosening the screws
placed at the bottom of the outer left side of the mixer, whereafter the legs can be turned.
When the mixer is placed corrrecly, the screws are tightened again.
Ensure that the voltage, phase and hertz printed on the identification plate of the mixer
are correct compared with that of the place of installation.
The identification plate is located at the top of the right side of the mixer.
Be sure the mixer is properly connected to the incoming power supply and that the ground
or earth connection is made.
If the mixer is provided with a five core cable, the mixer must also be connected to 0.
The arrow on the front of the planetary head is showing the direction of rotation of the
planetary head.
On 3-phase motors the direction of rotation can be changed by interchanging 2 phases of
the connecting cable or of the motor.