Metos KODIAK CR30, Руководство по эксплуатации

Страница: 8 / 16

8
Before starting the machine:
Place the bowl in the bowl trolley.
Put the desired tool into the bowl and wheel it into position
between the bowl arms. Ensure that the bowl is correctly en-
gaged with the bowl arms; see
Adjustments, page 6
.
Fit the safety guard and turn it so the filling hole is accessible
when the machine is running.
Turn the tool to lock it into the bayonet fitting.
Lift the bowl with the aid of the lifting handle.
The mixer is now ready to start.
It is possible to set both the running time and speed before
starting the machine; see next section:
Start the machine:
Press to start the mixer.
Press next to to increase the speed.
Press next to to reduce the speed.
The speed is shown as a number on the scale .
The display
1
represents the lowest speed,
approx. 64 rpm.
The display
12345678
represents the highest speed,
approx. 353 rpm.
Display of running time – hours:
Select a running time for the mixer by pressing next to
. The running time is shown in minutes and seconds in
the timer field between and .
Running times of up to 90 minutes are available.
The running time will not be reset if is pressed once; press
once more and it will be reset.
If no running time is selected, the display will show the time
elapsed since the mixer was started.
Inspection of ingredients while in use:
If the mixer needs to be stopped temporarily without affecting
the running time, press
. The mixer will slow down and
then stop and the running time will stop too.
The bowl can now be lowered and the ingredients checked.
Lift the bowl and press , and the mixer will start and the
running time will resume.
Stop the machine:
To stop the machine:
• Press . Running time not reset.
• Press twice. Running time reset.
• Press the emergency stop - the running time will be reset.
• ‘Tilt’ the safety guard - the running time will be reset.
• Lower the bowl - the running time will be reset.
In all cases the mixer can be restarted by pressing .
It will start at the lowest speed.
Resetting the timer:
The timer can be reset by pressing and next to
at the same time. If the timer is reset while the mixer is
running, the machine will stop and beep.
o
peratinG the mixer
:
Emergency stop
Stop
Increase time
Timer (timer field)
Decrease time
Speed indi-
cator
Decrease speed
Increase speed
Start