|
17
2.4.2014
METOS FRYGO EF-BA
Troubleshooting
Problem
Orsak
Lösning
The device is connected
to the signal but does not
light up and the unit does
not get hot.
The plug is not
fi rmly into the socket.
Check the connection.
The control unit micro
switch does not close.
Adjust the micro-switch
distance.
Heating indicator does
not come on and and the
unit does not get hot.
Connection of heasting
element is loosened.
Tighten two sides of
heating element and
screw.
Heating element is bro-
ken
Change elements
Power indicator is on but
the temperature does not
increase
Thermostat broken.
Change thermostat
Temperature rises but the
indicator does not light
The indicator light bulb is
broken
Change the bulb
The heating elements
stop heating
The safety thermostat
has tripped
Reset the safety thermo-
stat
The oil temperature keeps
rising and cannot be con-
trolled.
The safety thermostat is
broken
Change the safety ther-
mostat
The problems mentioned above are just examples. Turn off the appliance and contact the service in case
of failure or mafl function.
Turn the unit off and disconnect the power supply if the unit’s power cable is damaged. The power cable
may only be replaced only by qualifi ed professional staff.
Transportation and storage
• Handle and transport the unit carefully, and avoid vibrations. Store the unit elements in the original
packaging indoors in a well ventilated area where there are no corrosive gases.
• It is forbidden to turn the unit upside down.
Cleaning and maintenance
• Always
disconnect the appliance from the mains before cleaning.
• Clean the surfaces and connecting cord with a damp cloth and mild detergent. Never use abrasive
cleaners. Never spray the appliance with water, risk of electric shock.
• Always
turn the thermostat knob to “0” and dthe appliance from the mains when not in use.
• Store the appliance in a well ventilated area where there are corrosive gases.
NOTE
Check the unit daily before use. In this way, accidents and injuries can be prevented.
Turn off the appliance and contact the service in case of failure or mafl function.
Only qualifi ed service personnel should service the device.
For your own safety, do not place fl ammable liquids, gases or other objects near the appliance.
