12
|
Rev. 5.0 (from 01.08.2011)
Metos ARDOX S
5.3.2. Positioning the Ardox S Drop-In range
The appliance is delivered partly disassembled. Depending of the model of the appliance the package
contains the following parts:
Ardox S2 Drop-in Solid Top Cooking Unit:
• Hob assembly
3753288
1 pc.
• Frame
3753263
1 pc.
• Connection link
3753452
2 pc.
• Screws ISO 1481-ST4,8x16 C (or other suitable type) 20 pcs.
• Grease box
3753432
1 pc.
• Installation and Operation Manual
1 pc.
Ardox S4 Drop-In Solid Top Cooking Unit:
• Hob
assembly
3753284
1
pc.
• Frame
3753257
1 pc.
• Connection link
3753452
2 pc.
• Screws ISO 1481-ST4,8x16 C (or other suitable type)
24 pcs.
• Grease box
3753432
1 pc.
• Installation and Operation Manual
1 pc.
The appliance is intended for drop-in installation in the customer stainless steel table top. .
Installation in tabletops made from wood or other fl ammable surface is not allowed.
Max. recommended thickness of table top ( external stainless steel plywood underneath)
30mm. Dimensions of drop-in hole in table top must be as follows:
• Ardox S2 Drop-in Solid Top Cooking Unit
453mmx753mm
• Ardox S4 Drop-in Solid Top Cooking Unit
753mmx753mm
Please refer to the installation drawings and other drawings in chapter “Technical specifi cation” and
follow the installation steps described below:
• Cut drop-in hole in table top according to model of appliance to be installed. .
• Drop the frame into drop-in hole and fi x it to the tabletop by taping screws supplied with the appliance.
• Drop carefully the onto the frame hob. Frame must be completely covered by the stainless steel
frame of the hob. Orientation of the hob is correct when the drain hole is in front left corner.
The hob is heavy, handle it carefully. The S2 hob weighs about 40 kg and the S4 hob weighs about 70 kg.
5.4. Electrical
installation
5.4.1. Ranges
Before making the connection to the mains, ensure that the voltage and frequency are as indicated on
the appliance rating plate.
Should maintenance require the appliance to be tested before all the protective coverings are in place,
please be particularly careful of the moving parts inside the casing as well as of live parts..
To facilitate future maintenance and to increase safety, install a separate disconnection switch for the
range in the immediate vicinity of the appliance. The switch should disconnect the appliance completely
from the mains supply.
All information needed to connect the range is to be found on the name plate, the connection diagram
and the installation drawing.
STOP
STOP
Содержание ARDOX S 4 series
