|
11
Rev. 5.0 (from 01.08.2011)
Metos ARDOX S
5. Installation
5.1. General
The installation of the appliance must be carried out in accordance with the manufacturer’s instructions
and in compliance with local rules and regulations. These instructions must be used together with the
installation drawing.
This appliance may be connected to the mains electricity by qualifi ed persons only
The ground terminal is located at the back of the appliance at the bottom and is marked with the
corresponding symbol
.
5.2. Transporting and unpacking the range
The range is best transported in its own package, which protects it from outside damage. If it is necessary
to unpack the range, possible lifting must be done from the bottom frame using suitable spacers of
wood. To prevent damage, the top of the range must not be used as a worktop on the construction site
or during installation.
5.3. Positioning the range
5.3.1. Positioning the Ardox S range and the Tabletop range
Because the temperature of the cooking zone accidentally forgotten on without a pan may reach even
350°C, it is mandatory to follow local fi re safety regulations when installing the range. t.
When installing the range, care should be given to ensure that there is a free passage of cooling air
around the range and that there are no other sources of heat near the cooling vents.
It is recommended that the range is placed under a hood because of the steam arising during cooking.
The range is positioned in the installation place and adjusted in a horizontal position using the adjustable legs.
On ranges fi tted with an oven, the horizontal position should be checked from the runners of the oven in
order to achieve good browning results.
When the range is in the right place and in a horizontal position, fi x it fi rmly to the fl oor. Models for use
on land are fi xed by the plates on the back legs and ranges intended for use on ships by the plates on
each leg.
The Tabletop model is designed to be placed on a fl at, horizontal work surface. The level should be large
enough for the device to rest on all four feet. The fi nal adjustment is done by adjusting the adjustment
feet. After adjustment, check that the unit is standing fi rmly and that the feed cable is not pinched under
the feet.
STOP
STOP
Содержание ARDOX S 4 series
