Metkon FORCIPOL 1V, Руководство по эксплуатации и инструкция, Страница: 8 / 28

8
2. Installation and Set-Up
CAUTION! Follow approved procedures and take all necessary preventive safety measures
when lifting and installing this equipment. Improper lifting can result equipment damage.
FORCIPOL units are shipped as already assembled.

FORCIPOL is only available as bench top.

FORCIPOL should be placed on a sturdy and safe platform. Please be sure that the platform is
large enough and can stand it’s weight.

In order to work with equipment comfortably, it is recommended to leave at least 30 cm space
from all side of the equipment.

You can see the dimensions and weight of FORCIPOL as below:
Equipment
Dimensions
W D H Weight
Forcipol 1V 380 mm 690 mm 340 mm 30 kgs
Forcipol 300-1V 420 mm 730 mm 350 mm 30 kgs
Forcipol 2V 700 mm 690 mm 340 mm 40 kgs
Place the FORCIPOL on a sturdy table with convenient access to a 1-phase grounded power source,
water supply and water drain. Make the drain connection with the plastic hose and the hose clip
supplied. Connect the nylon tube to the water outlet at the rear of the instruments for water supply.
Place the disc and the splash guard. (Fig. 2)