Metkon FORCIPOL 1V, Руководство по эксплуатации и инструкция, Страница: 11 / 28

11

Below fittings will be sent for water hose connection together with the equipment :

Connect the line water to the unit with the plastic tube. Fig.2

Fix the Drain Water Hose to the drain. Fig. 2.

Make all the necessary electrical connection as shown on Fig. 2.
Fig.2. Connections
ATTENTION!

A Hydrophore generates much higher water pressure than city water. This causes input hose to
blow out and solenoid valve to be damaged. Max water pressure must not exceed 3 bars.

Well water or hard water causes solenoid valve to be clogged up and broke down due to dirt
and lime.
If the equipment used with well water, hydrophore or very hard water; water filtering and pressure
regulator system must be used. Otherwise, the equipment will be out of warranty. Please contact
Metkon Service (
metkonservice@metkon.com ) or your local representative if you need water filtering
and pressure regulator system.