Metkon FORCIPOL 1V, Руководство по эксплуатации и инструкция, Страница: 15 / 28

15
2. Troubleshooting
Fault Cause Action
Power lamp is on. Display does
not exist.
Data cable connection problem
Check the data cable between frequence
converter and the display board.
Water is not draining away
Drain hose clogged Clean the drain gap and hose
Drain hose squeezed Check the outlet hose and straighten the hose
Drain hose does not slope away Adjust the hose to an even slope
Water dripping at the battom
of the equipment
Water does not drain away See above
Noise when the machine starts The belt is not tight enough The belt must be tightened.
The machine does not start
The main switch is OFF Turn on the main switch.
The fuses at the back are blown Change the blown fuses
Cooling water does not flow
Water button is closed. Turn the water button ON
Valve on the water tab is closed Turn the valve ON.
Vibration on the grinding wheel
Dirt on the faceplate or under the
grinding wheel. Clean the contact surface between grinding
wheel and the face plate.
F. ACCESSORIES and CONSUMABLES
1. Accessories
200 MM APPLICATION
31 01 PVC Wheel, 200 mm
31 02 Aluminium Wheel, 200 mm
31 53 Splash Guard, 200 mm
31 04 Paper Ring, 200 mm
31 06 Cover
31 10 Special Plexyglass Protection Unit, to be used with Forcipol 1V
(To be ordered simultaneously together with the machine order)
250 MM APPLICATION
31 21 PVC Wheel, 250 mm
31 22 Aluminium Wheel, 250 mm
31 63 Splash Guard, 250 mm
31 24 Paper Ring, 250 mm
31 06 Cover
31 10 Special Plexyglass Protection Unit, to be used with Forcipol 1V
(To be ordered simultaneously together with the machine order)
300 MM APPLICATION
31 31 PVC Wheel, 300 mm
31 32 Aluminium Wheel, 300 mm
31 73 Splash Guard, 300 mm
31 34 Paper Ring, 300 mm
31 36 Cover
31 11 Special Plexyglass Protection Unit, to be used with Forcipol 300-1V