www.metel.eu 10/23
www.iplog.eu
LAN-RING
Optical ring status monitoring with LAN-RING protocol.
MODE
- supported modes
Close
- the event is triggered when the ring closes
Open
- the event is triggered if the ring opens
Direct
- the status of the optical ring is sent every 3 seconds. When the status changes, the change is sent
immediately
Change
- the event is triggered by closing or disconnecting the optical ring
Example:
The state of the ring is transmitted to the relay output, which is connected to the signaling LED
light. In case the ring is disconnected, the light is active.
&
A METEL-RING-MIB file is available for monitoring the status of SNMP rings, which also contains
SNMP TRAP permissions.
Event Management – LAN-RING, TCP, MIOS, EXP-C
TCP
The switch can listen on the specified TCP port set in the "Extensions / TCP" menu. If a device on the
network sends a notification to the switch's IP address and the specified TCP port, the switch can respond
to it with the created automatic action.
MODE
- supported modes
Matches
- the pattern entered must match the text that came
Contains
- the received text contains the specified pattern
Starts
- the received text starts with the specified pattern
Ends
- the received text ends with the specified pattern
Example:
In case the switch intercepts a TCP notification from the network with the entered text
(pattern), it will control the camera No. 2.
MIOS, EXP-C
Modes for communication with discontinued IO modules. More information at [email protected]
