2
Installation Guide—DX LCD Display
CE Directive 89/336/EEC:
EN 50081-1, EN 50082-1
UL Listed, CSA Certified
Panel Mounting:
•
flat-head screwdriver
•
appropriate tools to make panel cutout (e.g., drill, saw, etc.)
Wall Mounting:
•
flat-head screwdriver
•
drill and appropriately sized bits to drill holes for wall bracket
Size (H x W x D):
150 mm x 180 mm x 47 mm /
5.91 in. x 7.09 in. x 1.85 in.
Shipping Weight:
0.78 kg / 1.72 pounds
Ambient Operating
Conditions:
0 to +50 °C / +32° to +122 °F
10 to 90% RH, non-condensing
Ambient Storage
Conditions:
-20 to +60 °C / 0° to 140 °F
Supply Voltage:
24 VAC +15% / -10% or
9 to 18 VDC from DC Power Supply
(AC adapter)
Power Consumption:
4 VA at 24 VAC or
2 VA with DC Power Supply (AC adapter)
Housing Material:
ABS + polycarbonate (GE CYCOLOY),
self-extinguishing VO UL94
Housing Protection
(IEC529):
IP30 for hand-held and wall mounting
applications;
IP42 for panel mounting applications
The DX LCD Display can be used as either a portable, hand-held
device, or it can be permanently mounted in a panel or on the wall. For
panel and wall mounting applications, normally the display unit is
permanently connected to one DX controller, or permanently connected
to an N2 Bus with up to eight DX controllers.
The panel mounting kit, supplied as standard equipment with the DX
LCD Display, is required to mount the display in a panel or cabinet
door. To mount the DX LCD Display in a panel or cabinet door:
1. Make an appropriate cutout in the panel or cabinet door using the
dimensions shown in Figure 1
(note the maximum panel thickness
shown in the figure).
Agency
Compliance
Tools Needed
Physical
Dimensions
Environmental
Information
Installing the
DX LCD
Display
Panel Mounting