2
OPERATIONAL SAFETY
METAL CONDUCTS ELECTRICITY:
Do not use this equipment where contact may be made with power lines or other live electrical circuits.
FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS
COULD RESULT IN SERIOUS INJURY OR DEATH.
READ BEFORE BEGINNING ASSEMBLY.
All photos and drawings in this booklet are for reference purposes only.
OPERATION AND SAFETY
•
Do not use this equipment if you are in poor
health, taking medications, drugs, or have been
consuming alcohol, all of which may impair your
ability to work safely with this product.
•
Always use the Support Roller in conformity with
local or national legislation which applies.
•
Inspect before use. Do not use the Support
Roller if damaged or parts are missing.
•
Examine thoroughly to make sure the Support
Roller is properly set up.
•
Do not use the Support Roller for any application
other than that for which it was designed.
•
Do not modify the Support Roller or any of its
components.
•
Always use the Support Roller on flat and level
surface.
•
Do not use the Support Roller for scaffolding or
as a footbridge.
•
Never sit, stand or climb on this Support Roller. It
is not designed to accommodate this type of use.
•
Do not load the Support Roller with more than
75 lb (34 kg).
•
The Support Roller leg and chain must be
securely attached to scaffolding rungs before
using it.
•
ALWAYS tighten the lock handle securely prior to
use.
•
The Support Roller MUST be set at the
appropriate height for the task at hand.
•
Always ensure that the workpiece supported by
the Support Roller is stable and level.
•
Keep the Support Roller dry, clean, and free from
oil and grease.
•
Never use brake cleaner, gasoline or solvents
when cleaning plastic parts of this Support Roller.
•
The warnings, cautions, and instructions of this
manual cannot cover all possible conditions and
situations that may occur. It must be understood
by the operator that common sense and caution
are factors which cannot be built into this
product, but must be supplied by the operator.
MAX
MAX. 75 lb
(34 kg)
MAXIMUM LOAD
CAPACITY: 75 lb
(34 kg)
DO NOT USE FOR
SCAFFOLDING OR
AS A FOOTBRIDGE
ACIDS ARE
CORROSIVE.
DO NOT EXPOSE
UNIT TO CORROSIVE
SUBSTANCES
ALWAYS INSPECT
BEFORE USE
TIGHTEN THE LOCK
HANDLE SECURELY
PRIOR TO USE
SET AT THE
APPROPRIATE
HEIGHT FOR THE
TASK AT HAND.
ALWAYS USE ON FLAT
AND LEVEL SURFACE
THE LEG AND CHAIN
MUST BE SECURELY
ATTACHED TO
SCAFFOLDING RUNG
METAL CONDUCTS
ELECTRICTY
