Metallkraft UB 10, Инструкция по эксплуатации

Страница: 7 / 22

Transport, packaging, storage
UB 10 | Version 2.01 7
5 Transport, packaging, storage
5.1 Delivery and Transport
Delivery
Check the Machine on delivery for any visi-ble transpor-
tation damage. If you notice any damage to the device
please report this immediately to the carrier or dealer.
Transport
Remove the factory-prepared antirust agent with thinner
or paint remover before installing the device. Then lubri
-
cate with machine oil. Make sure that the device is not
set up or put into operation in a damp or wet environ
-
ment. The humidity should not exceed 60% and the
measured room temperature should be between max. 0
° C and 40 ° C amount. .
5.2 Packaging
All used packaging materials and packaging aids are re-
cyclable and should be taken to a materials recycling de-
pot to be disposed of.
The delivery packaging is made of cardboard, so please
dispose carefully by having it chopped up and given to
the recycling collection
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
5.3 Storage
Thoroughly clean the Universal Bending Machine in a
dry, clean and frost-free environment.
The universal bending machine must not be parked in a
room with chemicals.
If the machine is stored for a long time, all bare metal
parts must be greased against rusting.
6 Description of the device
Illustrations in this operating manual serve the gene-
ral understanding and may deviate from the actual
design.
Fig. 1: Description of the device
7 Assembly
Please note the following:
- Make sure that all bolts are inserted correctly and
in the proper place.
Fig. 2: Assembly
NOTE!
For a safe stand, it is recommended to attach the de
-
vice to a stable and stable surface using the holes pro
-
vided on the bottom of the device.
Adjusting pin
Bending
arm
Eccentric counterholder
Bending
unit
bending
rollers for
round
material
Frame
Bending rollers for flat
material