Metallkraft HRB-10, Руководство по эксплуатации

Страница: 2 / 8

-2-
I. SAFETY WARNINGS & CAUTIONS
WARNING:
When using tool, basic safety precautions should always be followed to reduce the
risk of person injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean.
Cluttered areas invite injuries.
2.
Observe work area conditions
. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted.
3.
Keep children away.
Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
4.
Store idle equipment.
When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5.
Do not force tool.
It will do the job better and more safety at the rate for which it was
intended. Do not use inappropriate attachments in an attempt to exceed the tool
capacity.
6.
Use the right tool for the job.
Do not attempt to force a small tool or attachment to do
the work of a large industrial tool. Do not use a tool for a purpose for which it was not
intended.
7.
Dress properly.
Do not wear loose clothing of jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid footwear
are recommended when working. Wear restrictive hair covering to contain long hair.
8.
Use eye and ear protection.
Always wear ISO approved impact safety goggles.
Wear a full-face shield if you are producing metal filings or wood chips. Wear an ISO
approved dust mask or respirator when working around metal, and chemical dusts
and mists.
9.
Do not overreach.
Keep proper footing and balance at all times. Do not reach over or
across running machine.
10.
Maintain tools with care.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories. The
handles must be kept clean, dry, and free from oil and grease at all times.
11.
Stay alert.
Watch what you are doing; use common sense. Do not operate any tool
when you are tried.
12.
Check for damaged parts.
Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any
part that is damaged should be properly repaired or replaced by a qualified technician.
13.
Guard against electric shock.
Prevent body contact with grounded surfaces such as
pipes, radiators, ranges, and refrigerator enclosures.
14.
Replacement parts and accessories.
When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use accessories
intended for use with this tool. Approved accessories are available from the distributor.
15.
Do not operate tool if under the influence of alcohol or drugs.
Read warning