9
PREPARATION FOR ASSEMBLY
The Step Chair must be installed and used in an environment conducive to Pilates
practice. The following characteristics must be respected in the equipment
installation area:
•
Proper leveling and floor stability;
•
Low humidity;
•
Protection against sunlight.
TOOLS AND FASTENERS FOR ASSEMBLY
For your comfort, Metalife provides all the
tools and fasteners needed to assemble your
equipment.
Keep them for future maintenance or
component replacement.
During assembly, the guidelines contained in this manual must be properly
followed. The Equipment is subject to damage during this process, so be
careful when dealing with components and tools.
Damage caused by failure to comply with the instructions in this
manual is the responsibility of the client.
If you have any questions or difficulties, please contact Metalife
Technical Assistance.
Following the instructions contained
in this manual, it is estimated that
the complete assembly of your Step
Chair will take 60 minutes.
01 person is needed to
assemble the equipment.
.
MAKE SURE YOU HAVE THEM AT HAND AND IDENTIFY THEM
ON THE SIDE AND IN THE TABLE ON PAGE 6 BEFORE STARTING
ASSEMBLY.
