10
DETAILED ASSEMBLY
Repeat the procedure on the other
pedal. Position the upholstery with
the side slot facing the center of
the equipment. Secure it using the
INT HEX SCREW CH ZP 1/4x1 and
tighten up with the SHORT
HEXAGONAL ALLEN WRENCH
5/32.
ASSEMBLING THE UPHOLSTERY
Align the seat upholstery with the wooden
structure, so the holes match. Secure it
using the INT HEX SCREW CL ZP 1/4x1.1/2
and FLAT WASHER ZB 1.9x7x17mm (1/4).
Tighten up with the SHORT HEXAGONAL
ALLEN WRENCH 3/16.
Secure the pedal upholstery using
INT HEX SCREW CH ZP 1/4x1 and
tighten up with the SHORT
HEXAGONAL ALLEN KEY 5/32
DO NOT OVERTIGHTEN.
UPHOLSTERY HAS A LEFT AND RIGHT
SIDE. FIT THE UPHOLSTERY ONTO
THE PEDAL LOCK SO THAT THE SIDE
OPENING FACES THE CENTER OF THE
EQUIPMENT.
