Metalfire AVENUE MF 1050-40 GHE, Инструкция по установке и эксплуатации

Страница: 99 / 103

AVENUE_GHE_EN_07
99
8 Error analysis
The fireplace control works using two-way communication between the RF remote control and the receiver.
As a result, error messages may be displayed on the remote control screen.
8.1 Examples of error messages:
Communication failure between the RF remote control and the fireplace.
The triangular symbol flashes.
The distance between fireplace and the remote control may be too great. Bring
the remote control closer to the fireplace.
Fireplace malfunction. An ‘F’ followed by a two
-digit malfunction code appears
on the screen. The triangular symbol flashes.
A lock-out malfuncti
on in the fireplace. An ‘F’ followed by a two
-digit malfunction
code appears on the screen. The triangular symbol flashes.
The ‘reset’ text indicates that the fireplace can be reset.
This can be done by pressing both arrow keys at the same time.
Malfunction of the temperature sensor in the RF remote control.
The system will automatically switch to manual operation and flame height
control.
The hourglass symbol appears as soon as the lock-out malfunction has been
reset by pressing both arrow keys. Once the fireplace has been reset, the
basic screen will be displayed again on the remote control.